1. Manually manually put the workpiece to be welded on the lower electrode rod, manually manually support the support sleeve on the electrode rod and lock it, start the upper pressing cylinder, and two measuring cylinders, and the cylinder pushes the positioning plate/positioning pin to automatically clamp the workpiece. The positioning of the workpiece is completed, and the workpiece does not move during welding. The entire direct welding of the workpiece is completed by the program controlling the servo motor to drive the welding wheel on the upper welding wheel.
2. This machine mainly uses seam welding power source, mainly consisting of testing device, welding host, welding wheel moving power device (servo motor device), upper welding wheel and lower electrode, linear guide and screw assembly, welding cylinder, positioning tool, side Position clamping cylinder and tightening device, cooling device, control system and other components.
Turn on the power supply - confirm the parameters - manually place the workpiece to be welded on the lower electrode, manually lock the movable end of the electric shock bar - start the upper clamping cylinder / positioning the cylinder on both sides, automatically clamp the positioning workpiece - start the welding machine - the welding cylinder is lowered in place to compress Workpiece—servo motor drives the upper welding wheel to move the weld—welding is completed—manually remove the workpiece—to enter the next cycle
1, rated capacity: 50KVA
2, rated load duration: 50%
3, input power: three-phase 380V ± 10% / 50HZ
4, welding transformer insulation grade: F grade
5, the current adjustable range: 20% ~ 99%
6, electrode stroke: about 80mm (depending on the welding workpiece space)
7, electrode pressure: about 8KN
8, compressed air pressure: 0.4 ~ 0.8MPa
9, cooling water pressure: 0.15 ~ 0.3MPa
10, working height: about 900mm